HP Omen 15-ENxxxx (2020) AMD
TL;DR: siehe "Fazit" unten.
xxx = to do / to check
Hardware
- 15.6" 1920x1080 FHD Display
- CPU AMD Ryzen 4800H Serie (CPUs 8 Cores, 16 Threads, 2.9 bis 4.2GHz, 7nm)
- RAM DDR4, RAM 16GB (2x 8GB in SO-DIMM-Sockeln)
- Nvidia GTX 1660Ti 6GB
- SSD: Samsung 512GB. M.2 PCIe 3.0 x4, NVME (2. M.2 Slot frei)
Realtek RTL8822CE AC WiFi
- Gbit Ethernet Realtek RTL8168/8111
- Bluetooth 5.0
- USB-A / USB-C Gen2
- HDMI 2.0a / MiniDP
lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Root Complex 00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Renoir IOMMU 00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge 00:01.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe GPP Bridge 00:01.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe GPP Bridge 00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge 00:02.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe GPP Bridge 00:02.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe GPP Bridge 00:02.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe GPP Bridge 00:08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge 00:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir Internal PCIe GPP Bridge to Bus 00:08.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir Internal PCIe GPP Bridge to Bus 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 51) 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 51) 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 0 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 1 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 2 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 3 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 4 00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 5 00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 6 00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 7 01:00.0 VGA compatible controller: NVIDIA Corporation TU116M [GeForce GTX 1660 Ti Mobile] (rev a1) 01:00.1 Audio device: NVIDIA Corporation TU116 High Definition Audio Controller (rev a1) 01:00.2 USB controller: NVIDIA Corporation TU116 USB 3.1 Host Controller (rev a1) 01:00.3 Serial bus controller [0c80]: NVIDIA Corporation TU116 [GeForce GTX 1650 SUPER] (rev a1) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 16) 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8822CE 802.11ac PCIe Wireless Network Adapter 04:00.0 SD Host controller: Genesys Logic, Inc GL9750 SD Host Controller (rev 01) 05:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981/PM983 06:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Renoir (rev c6) 06:00.2 Encryption controller: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) Platform Security Processor 06:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Renoir USB 3.1 06:00.4 USB controller: Advanced Micro Devices, Inc. [AMD] Renoir USB 3.1 06:00.5 Multimedia controller: Advanced Micro Devices, Inc. [AMD] Raven/Raven2/FireFlight/Renoir Audio Processor (rev 01) 06:00.6 Audio device: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) HD Audio Controller 07:00.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 81) 07:00.1 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 81)
lsusb
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 003: ID 0bda:b00c Realtek Semiconductor Corp. 802.11ac WLAN Adapter <--- Bluetooth! Bus 003 Device 002: ID 30c9:000e DJKANA1BIE7P2Y HP Wide Vision HD Camera Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
BIOS
- HP OMEN Laptop 15-en0xxx/8786, BIOS F.07 09/16/2020
secure boot disabled, battery remaining time enabled, TPM enabled
Ubuntu 20.04.1 64bit
Die Hardware (Ryzen 4000, HP Omen 15-EN AMD Serie an sich) ist noch recht neu, daher braucht man auch einen sehr neuen Kernel, Firmware, usw.
Firmware
amd64-microcode 3.20191218.1ubuntu1 und linux-firmware 1.187.4 sind standardmaessig installiert.
Kernel
Default-Kernel 20.04.1
Default-Kernel Ubuntu 20.04.1 ist 5.4 und daher relativ alt. Er reicht aber für die Installation, danach sollte man auf >= 5.8 gehen.
Direkt nach Installation: Linux omen15 5.4.0-53-generic #59-Ubuntu SMP Wed Oct 21 09:38:44 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
Bald gibt es dann auch 20.04.2 mit Kernel 5.8.
Edge-Kernel
"Edge-Kernel" (kurz: EK): Linux omen15 5.8.0-28-generic #30~20.04.1-Ubuntu SMP Thu Nov 5 20:57:40 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
Wichtig: Kernel >= 5.8 installieren, z.B. den Edge-Kernel. Dieser ist aus den Standard-APT-Quellen verfügbar als linux-generic-hwe-20.04-edge.
Grafik
Beim Booten vom U2004 Installmedium Kernel-Parameter "nomodeset" angeben, sonst haengt es sich auf.
Dann nvidia-driver-455 installieren und nomodeset wieder entfernen.
xxx Funktioniert ein externes Display / Dual-Head-Setup?
Helligkeits-Steuerung tut nicht direkt nach Installation: Tasten heller/dunkler funktionieren, Helligkeit aendert sich aber nicht.
Nach Installation nvidia-driver und ohne nomodeset tut die Helligkeits-Steuerung.
glxgears mit EK: 1060 fps, glmark2 Score: 6312
Umschaltung Grafik <-> Console funktioniert problemlos mit EK.
Text-Console scrollt schnell mit EK.
Dualhead Setup
Wenn man einen externen Monitor zusammen mit dem internen Display betreiben will, funktioniert die Default-Konfiguration von U 20.04.1 nicht!
# /etc/X11/xorg.conf.d/10-amdgpu.conf Section "OutputClass" Identifier "AMDgpu" MatchDriver "amdgpu" Driver "amdgpu" Option "PrimaryGPU" "no" EndSection
# /etc/X11/xorg.conf.d/10-amdgpu.conf Section "OutputClass" Identifier "nvidia" MatchDriver "nvidia-drm" Driver "nvidia" Option "AllowEmptyInitialConfiguration" Option "PrimaryGPU" "yes" ModulePath "/usr/lib/x86_64-linux-gnu/nvidia/xorg" EndSection
Mit o.g. zusätzlich erzeugten Dateien (und ohne /etc/X11/xorg.conf) funktionierten 2 Bildschirme, auch via die ThinkPad USB-C Dock Gen2.
Wenn man versucht, Primary umzutauschen, funktioniert es mit 2 Bildschirmen nicht mehr, beide dunkel.
Nachtrag: so richtig stabil ist es auch mit den o.g. 2 Configs nicht. Manchmal klemmt es nach dem graphischen Login. Habe den Eindruck, dass es etwas stabiler ist, wenn man erst sich einloggt und dann erst den ext. Bildschirm anschliesst.
TODO: ausprobieren:
Sound
EK: Sound-Ausgabe Lautsprecher und internes Mikrofon tun (pavucontrol).
Sound-Ausgabe auf Kopfhörer via 3.5mm Klinke funktioniert.
xxx Funktioniert ein Headset an der 3.5mm-Buchse (sowohl Mikrofon als auch Kopfhörer)?
Webcam
Funktioniert mit EK (Test mit "cheese").
WiFi
Funktioniert, direkt nach Installation, ebenso mit EK.
LAN
EK: funktioniert!
LAN-Buchse: mit Link- und Activity-LED.
Bluetooth
Funktioniert mit EK.
USB
USB-A und USB-C Anschlüsse: funktionieren.
Max. Durchsatz USB-C: 760 MB/s (von schneller SSD gelesen)
Tastatur
Mit EK: Fn-Tasten tun.
Mit EK: Caps-Lock LED verhält sich normal (toggle ein/aus).
Spezialfunktions-Tasten "Calculator" (oberhalb Ziffernblock) funktionieren.
Touchpad
Direkt nach Installation und mit EK: tut.
SDcard-Reader
EK: Funktioniert (große SDCard, für Mini/MicroSD braucht man nen Adapter).
SSD
Funktioniert. Da es eine PCIe/NVME-SSD ist, kann man nur mit UEFI booten. Geraet scheint auch anderweitig kein Legacy-Boot zu koennen.
=== START OF INFORMATION SECTION === Model Number: SAMSUNG MZVLB512HBJQ-000H1 Firmware Version: HPS0NEXF ... Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 8.00W - - 0 0 0 0 0 0 1 + 6.30W - - 1 1 1 1 0 0 2 + 3.50W - - 2 2 2 2 0 0 3 - 0.0700W - - 3 3 3 3 210 1200 4 - 0.0050W - - 4 4 4 4 2000 8000 ...
$ sudo dd if=/dev/nvme0n1 of=/dev/null bs=32M count=1000 33554432000 Bytes (34 GB, 31 GiB) kopiert, 12,6231 s, 2,7 GB/s
Suspend / Wake-Up
Mit EK, nvidia-driver, ohne nomodeset: tut!
Leistungsaufnahme / Power-Saving
Mit EK zeigt powertop:
- ca. 11W / 12W / 14W - idle Desktop, WLAN an, niedrigste/mittlere/höchste Bildschirmhelligkeit (ohne Optimierung)
- ca. 10.6W / 12W / 13.7W - dito, nach powertop-"Optimierung"
Davon sind ca. 3W die Tastaturbeleuchtung (alles weiss)!!!
dmesg
[ 0.000000] Linux version 5.8.0-33-generic (buildd@lgw01-amd64-010) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #36~20.04.1-Ubuntu SMP Wed Dec 9 17:01:13 UTC 2020 (Ubuntu 5.8.0-33.36~20.04.1-generic 5.8.17) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.8.0-33-generic root=UUID=e9883973-713a-4e3e-898c-e5edbd172d2b ro quiet splash nomodeset vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009eeffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000009ef0000-0x0000000009ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000000a20d000-0x00000000a6f9efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a6f9f000-0x00000000a711cfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a711d000-0x00000000a7187fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000a7188000-0x00000000a733bfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000a733c000-0x00000000acdfdfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000acdfe000-0x00000000adffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ae000000-0x00000000afffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042f33ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000042f340000-0x00000004701fffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xa3fef018-0xa400f057] usable ==> usable [ 0.000000] e820: update [mem 0xa3fef018-0xa400f057] usable ==> usable [ 0.000000] e820: update [mem 0xa358e018-0xa359b457] usable ==> usable [ 0.000000] e820: update [mem 0xa358e018-0xa359b457] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000009eeffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000009ef0000-0x0000000009ffffff] reserved [ 0.000000] reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable [ 0.000000] reserve setup_data: [mem 0x000000000a200000-0x000000000a20cfff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000000a20d000-0x00000000a358e017] usable [ 0.000000] reserve setup_data: [mem 0x00000000a358e018-0x00000000a359b457] usable [ 0.000000] reserve setup_data: [mem 0x00000000a359b458-0x00000000a3fef017] usable [ 0.000000] reserve setup_data: [mem 0x00000000a3fef018-0x00000000a400f057] usable [ 0.000000] reserve setup_data: [mem 0x00000000a400f058-0x00000000a6f9efff] usable [ 0.000000] reserve setup_data: [mem 0x00000000a6f9f000-0x00000000a711cfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000a711d000-0x00000000a7187fff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000a7188000-0x00000000a733bfff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000a733c000-0x00000000acdfdfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000acdfe000-0x00000000adffffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000ae000000-0x00000000afffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fd000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000042f33ffff] usable [ 0.000000] reserve setup_data: [mem 0x000000042f340000-0x00000004701fffff] reserved [ 0.000000] efi: EFI v2.70 by American Megatrends [ 0.000000] efi: ACPI=0xa7187000 ACPI 2.0=0xa7187014 SMBIOS=0xacc06000 SMBIOS 3.0=0xacc05000 MEMATTR=0xa612d118 ESRT=0xa5f13818 RNG=0xacc41f98 [ 0.000000] efi: seeding entropy pool [ 0.000000] random: fast init done [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 3.2.0 present. [ 0.000000] DMI: HP OMEN Laptop 15-en0xxx/8786, BIOS F.07 09/16/2020 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2894.570 MHz processor [ 0.000134] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000135] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000139] last_pfn = 0x42f340 max_arch_pfn = 0x400000000 [ 0.000142] MTRR default type: uncachable [ 0.000143] MTRR fixed ranges enabled: [ 0.000143] 00000-9FFFF write-back [ 0.000144] A0000-DFFFF uncachable [ 0.000144] E0000-FFFFF write-protect [ 0.000145] MTRR variable ranges enabled: [ 0.000146] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000146] 1 base 000080000000 mask FFFFE0000000 write-back [ 0.000147] 2 base 0000A0000000 mask FFFFF0000000 write-back [ 0.000147] 3 disabled [ 0.000147] 4 disabled [ 0.000148] 5 disabled [ 0.000148] 6 disabled [ 0.000148] 7 disabled [ 0.000149] TOM2: 0000000450000000 aka 17664M [ 0.000338] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000407] e820: update [mem 0xb0000000-0xffffffff] usable ==> reserved [ 0.000416] last_pfn = 0xae000 max_arch_pfn = 0x400000000 [ 0.003583] esrt: Reserving ESRT space from 0x00000000a5f13818 to 0x00000000a5f13850. [ 0.003591] e820: update [mem 0xa5f13000-0xa5f13fff] usable ==> reserved [ 0.003632] check: Scanning 1 areas for low memory corruption [ 0.003636] Using GB pages for direct mapping [ 0.004137] secureboot: Secure boot disabled [ 0.004138] RAMDISK: [mem 0x3a358000-0x3d485fff] [ 0.004144] ACPI: Early table checksum verification disabled [ 0.004147] ACPI: RSDP 0x00000000A7187014 000024 (v02 HPQOEM) [ 0.004149] ACPI: XSDT 0x00000000A7186728 0000EC (v01 HPQOEM SLIC-MPC 01072009 AMI 01000013) [ 0.004153] ACPI: FACP 0x00000000A717B000 000114 (v06 HPQOEM SLIC-MPC 01072009 HP 00010013) [ 0.004156] ACPI: DSDT 0x00000000A7164000 0160F4 (v02 HPQOEM 8786 01072009 ACPI 20120913) [ 0.004158] ACPI: FACS 0x00000000A7322000 000040 [ 0.004159] ACPI: SDEV 0x00000000A7185000 00014E (v01 HPQOEM 8786 00000000 HP 00000000) [ 0.004161] ACPI: SSDT 0x00000000A717D000 007216 (v02 HPQOEM 8786 00000002 ACPI 04000000) [ 0.004163] ACPI: IVRS 0x00000000A717C000 0001A4 (v02 HPQOEM 8786 00000001 HP 00000000) [ 0.004164] ACPI: FIDT 0x00000000A7163000 00009C (v01 HPQOEM 8786 01072009 HP 00010013) [ 0.004166] ACPI: MCFG 0x00000000A7162000 00003C (v01 HPQOEM 8786 01072009 HP 00010013) [ 0.004167] ACPI: HPET 0x00000000A7161000 000038 (v01 HPQOEM 8786 01072009 HP 00000005) [ 0.004169] ACPI: SSDT 0x00000000A7160000 000228 (v01 HPQOEM 8786 00000001 ACPI 20120913) [ 0.004170] ACPI: VFCT 0x00000000A7152000 00D484 (v01 HPQOEM 8786 00000001 HP 31504F47) [ 0.004172] ACPI: SSDT 0x00000000A7151000 000050 (v01 HPQOEM 8786 00000001 ACPI 20120913) [ 0.004174] ACPI: SSDT 0x00000000A714D000 0039F4 (v01 HPQOEM 8786 00000001 ACPI 00000001) [ 0.004175] ACPI: CRAT 0x00000000A714C000 000F28 (v01 HPQOEM 8786 00000001 HP 00000001) [ 0.004177] ACPI: CDIT 0x00000000A714B000 000029 (v01 HPQOEM 8786 00000001 HP 00000001) [ 0.004178] ACPI: SSDT 0x00000000A714A000 0000B9 (v01 HPQOEM 8786 00000001 ACPI 20120913) [ 0.004180] ACPI: SSDT 0x00000000A7149000 000C78 (v01 HPQOEM 8786 00000001 ACPI 20120913) [ 0.004181] ACPI: SSDT 0x00000000A7147000 0010AC (v01 HPQOEM 8786 00000001 ACPI 20120913) [ 0.004183] ACPI: SSDT 0x00000000A7146000 000D87 (v01 HPQOEM 8786 00000001 ACPI 20120913) [ 0.004184] ACPI: SSDT 0x00000000A7142000 0030C8 (v01 HPQOEM 8786 00000001 ACPI 20120913) [ 0.004186] ACPI: WSMT 0x00000000A7141000 000028 (v01 HPQOEM 8786 01072009 HP 00010013) [ 0.004187] ACPI: APIC 0x00000000A7140000 0000DE (v03 HPQOEM 8786 01072009 HP 00010013) [ 0.004189] ACPI: SSDT 0x00000000A713F000 00007D (v01 HPQOEM 8786 00000001 ACPI 20120913) [ 0.004190] ACPI: SSDT 0x00000000A713E000 000517 (v01 HPQOEM 8786 00000001 ACPI 20120913) [ 0.004192] ACPI: SSDT 0x00000000A713D000 00082C (v01 HPQOEM 8786 00000001 ACPI 20120913) [ 0.004193] ACPI: FPDT 0x00000000A713C000 000044 (v01 HPQOEM 8786 01072009 HP 01000013) [ 0.004195] ACPI: BGRT 0x00000000A713B000 000038 (v01 HPQOEM 8786 01072009 HP 00010013) [ 0.004199] ACPI: Local APIC address 0xfee00000 [ 0.004307] No NUMA configuration found [ 0.004307] Faking a node at [mem 0x0000000000000000-0x000000042f33ffff] [ 0.004314] NODE_DATA(0) allocated [mem 0x42f316000-0x42f33ffff] [ 0.004526] Zone ranges: [ 0.004527] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.004528] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.004528] Normal [mem 0x0000000100000000-0x000000042f33ffff] [ 0.004529] Device empty [ 0.004529] Movable zone start for each node [ 0.004530] Early memory node ranges [ 0.004531] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.004531] node 0: [mem 0x0000000000100000-0x0000000009eeffff] [ 0.004532] node 0: [mem 0x000000000a000000-0x000000000a1fffff] [ 0.004532] node 0: [mem 0x000000000a20d000-0x00000000a6f9efff] [ 0.004532] node 0: [mem 0x00000000acdfe000-0x00000000adffffff] [ 0.004533] node 0: [mem 0x0000000100000000-0x000000042f33ffff] [ 0.004740] Zeroed struct page in unavailable ranges: 35997 pages [ 0.004742] Initmem setup node 0 [mem 0x0000000000001000-0x000000042f33ffff] [ 0.004742] On node 0 totalpages: 4027235 [ 0.004743] DMA zone: 64 pages used for memmap [ 0.004743] DMA zone: 26 pages reserved [ 0.004744] DMA zone: 3999 pages, LIFO batch:0 [ 0.004757] DMA32 zone: 10691 pages used for memmap [ 0.004757] DMA32 zone: 684164 pages, LIFO batch:63 [ 0.009079] Normal zone: 52173 pages used for memmap [ 0.009081] Normal zone: 3339072 pages, LIFO batch:63 [ 0.034427] ACPI: PM-Timer IO Port: 0x808 [ 0.034431] ACPI: Local APIC address 0xfee00000 [ 0.034438] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.034452] IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23 [ 0.034458] IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55 [ 0.034459] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.034461] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.034462] ACPI: IRQ0 used by override. [ 0.034462] ACPI: IRQ9 used by override. [ 0.034464] Using ACPI (MADT) for SMP configuration information [ 0.034465] ACPI: HPET id: 0x10228201 base: 0xfed00000 [ 0.034481] e820: update [mem 0xa3fcc000-0xa3febfff] usable ==> reserved [ 0.034491] smpboot: Allowing 16 CPUs, 0 hotplug CPUs [ 0.034511] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.034512] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.034513] PM: hibernation: Registered nosave memory: [mem 0x09ef0000-0x09ffffff] [ 0.034514] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20cfff] [ 0.034515] PM: hibernation: Registered nosave memory: [mem 0xa358e000-0xa358efff] [ 0.034516] PM: hibernation: Registered nosave memory: [mem 0xa359b000-0xa359bfff] [ 0.034517] PM: hibernation: Registered nosave memory: [mem 0xa3fcc000-0xa3febfff] [ 0.034517] PM: hibernation: Registered nosave memory: [mem 0xa3fef000-0xa3feffff] [ 0.034518] PM: hibernation: Registered nosave memory: [mem 0xa400f000-0xa400ffff] [ 0.034519] PM: hibernation: Registered nosave memory: [mem 0xa5f13000-0xa5f13fff] [ 0.034520] PM: hibernation: Registered nosave memory: [mem 0xa6f9f000-0xa711cfff] [ 0.034521] PM: hibernation: Registered nosave memory: [mem 0xa711d000-0xa7187fff] [ 0.034521] PM: hibernation: Registered nosave memory: [mem 0xa7188000-0xa733bfff] [ 0.034521] PM: hibernation: Registered nosave memory: [mem 0xa733c000-0xacdfdfff] [ 0.034522] PM: hibernation: Registered nosave memory: [mem 0xae000000-0xafffffff] [ 0.034522] PM: hibernation: Registered nosave memory: [mem 0xb0000000-0xefffffff] [ 0.034523] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff] [ 0.034523] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfcffffff] [ 0.034523] PM: hibernation: Registered nosave memory: [mem 0xfd000000-0xffffffff] [ 0.034525] [mem 0xb0000000-0xefffffff] available for PCI devices [ 0.034527] Booting paravirtualized kernel on bare hardware [ 0.034530] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.034537] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1 [ 0.035550] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u262144 [ 0.035559] pcpu-alloc: s192512 r8192 d28672 u262144 alloc=1*2097152 [ 0.035560] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.035589] Built 1 zonelists, mobility grouping on. Total pages: 3964281 [ 0.035590] Policy zone: Normal [ 0.035591] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.8.0-33-generic root=UUID=e9883973-713a-4e3e-898c-e5edbd172d2b ro quiet splash nomodeset vt.handoff=7 [ 0.035654] You have booted with nomodeset. This means your GPU drivers are DISABLED [ 0.035655] Any video related functionality will be severely degraded, and you may not even be able to suspend the system properly [ 0.035655] Unless you actually understand what nomodeset does, you should reboot without enabling it [ 0.038480] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.039957] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.040007] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.071318] Memory: 15599320K/16108940K available (14339K kernel code, 2563K rwdata, 5356K rodata, 2636K init, 4900K bss, 509620K reserved, 0K cma-reserved) [ 0.071325] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=1 [ 0.071441] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.071453] ftrace: allocating 46177 entries in 181 pages [ 0.081971] ftrace: allocated 181 pages with 5 groups [ 0.082070] rcu: Hierarchical RCU implementation. [ 0.082071] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16. [ 0.082071] Trampoline variant of Tasks RCU enabled. [ 0.082072] Rude variant of Tasks RCU enabled. [ 0.082072] Tracing variant of Tasks RCU enabled. [ 0.082072] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.082073] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16 [ 0.084005] NR_IRQS: 524544, nr_irqs: 1096, preallocated irqs: 16 [ 0.084373] random: crng done (trusting CPU's manufacturer) [ 0.084398] vt handoff: transparent VT on vt#7 [ 0.084402] Console: colour dummy device 80x25 [ 0.084407] printk: console [tty0] enabled [ 0.084426] ACPI: Core revision 20200528 [ 0.084621] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.084641] APIC: Switch to symmetric I/O mode setup [ 0.085378] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR0, rdevid:160 [ 0.085379] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR1, rdevid:160 [ 0.085380] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR2, rdevid:160 [ 0.085380] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR3, rdevid:160 [ 0.182527] Switched APIC routing to physical flat. [ 0.183098] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.200639] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b9392badc, max_idle_ns: 440795202126 ns [ 0.200645] Calibrating delay loop (skipped), value calculated using timer frequency.. 5789.14 BogoMIPS (lpj=11578280) [ 0.200647] pid_max: default: 32768 minimum: 301 [ 0.202809] LSM: Security Framework initializing [ 0.202821] Yama: becoming mindful. [ 0.202856] AppArmor: AppArmor initialized [ 0.202972] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.203014] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.203305] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 0.203361] LVT offset 1 assigned for vector 0xf9 [ 0.203466] LVT offset 2 assigned for vector 0xf4 [ 0.203492] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512 [ 0.203492] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0 [ 0.203496] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.203497] Spectre V2 : Mitigation: Full AMD retpoline [ 0.203498] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.203498] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.203500] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.203500] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.203501] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.203800] Freeing SMP alternatives memory: 40K [ 0.317559] smpboot: CPU0: AMD Ryzen 7 4800H with Radeon Graphics (family: 0x17, model: 0x60, stepping: 0x1) [ 0.317676] Performance Events: Fam17h+ core perfctr, AMD PMU driver. [ 0.317680] ... version: 0 [ 0.317681] ... bit width: 48 [ 0.317681] ... generic registers: 6 [ 0.317681] ... value mask: 0000ffffffffffff [ 0.317681] ... max period: 00007fffffffffff [ 0.317682] ... fixed-purpose events: 0 [ 0.317682] ... event mask: 000000000000003f [ 0.317710] rcu: Hierarchical SRCU implementation. [ 0.318400] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.318533] smp: Bringing up secondary CPUs ... [ 0.318618] x86: Booting SMP configuration: [ 0.318619] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 [ 0.334949] TSC synchronization [CPU#0 -> CPU#8]: [ 0.334950] Measured 4524 cycles TSC warp between CPUs, turning off TSC clock. [ 0.334950] tsc: Marking TSC unstable due to check_tsc_sync_source failed [ 0.336708] #9 #10 #11 #12 #13 #14 #15 [ 0.336914] smp: Brought up 1 node, 16 CPUs [ 0.336914] smpboot: Max logical packages: 1 [ 0.336914] smpboot: Total of 16 processors activated (92626.24 BogoMIPS) [ 0.340685] devtmpfs: initialized [ 0.340685] x86/mm: Memory block size: 128MB [ 0.341299] PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20cfff] (53248 bytes) [ 0.341299] PM: Registering ACPI NVS region [mem 0xa7188000-0xa733bfff] (1785856 bytes) [ 0.341301] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.341301] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.341301] pinctrl core: initialized pinctrl subsystem [ 0.341301] PM: RTC time: 17:46:06, date: 2020-12-23 [ 0.341301] thermal_sys: Registered thermal governor 'fair_share' [ 0.341301] thermal_sys: Registered thermal governor 'bang_bang' [ 0.341301] thermal_sys: Registered thermal governor 'step_wise' [ 0.341301] thermal_sys: Registered thermal governor 'user_space' [ 0.341301] thermal_sys: Registered thermal governor 'power_allocator' [ 0.341301] NET: Registered protocol family 16 [ 0.341301] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.341301] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.341424] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.341437] audit: initializing netlink subsys (disabled) [ 0.341455] audit: type=2000 audit(1608745566.164:1): state=initialized audit_enabled=0 res=1 [ 0.341455] EISA bus registered [ 0.341455] cpuidle: using governor ladder [ 0.341455] cpuidle: using governor menu [ 0.341455] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.341455] ACPI: bus type PCI registered [ 0.341455] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.341455] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.341455] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 0.341455] PCI: Using configuration type 1 for base access [ 0.345071] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.345071] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.348713] ACPI: Added _OSI(Module Device) [ 0.348714] ACPI: Added _OSI(Processor Device) [ 0.348714] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.348714] ACPI: Added _OSI(Processor Aggregator Device) [ 0.348715] ACPI: Added _OSI(Linux-Dell-Video) [ 0.348716] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.348716] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.358743] ACPI BIOS Error (bug): Failure creating named object [\SMIB], AE_ALREADY_EXISTS (20200528/dsfield-637) [ 0.358748] ACPI Warning: NsLookup: Type mismatch on SMIB (Integer), searching for (RegionField) (20200528/nsaccess-697) [ 0.360298] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GPP4.WLAN], AE_NOT_FOUND (20200528/dswload2-162) [ 0.360301] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20200528/psobject-220) [ 0.360302] ACPI: Skipping parse of AML opcode: Scope (0x0010) [ 0.361964] ACPI: 13 ACPI AML tables successfully acquired and loaded [ 0.363187] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.364899] ACPI: EC: EC started [ 0.364900] ACPI: EC: interrupt blocked [ 0.800658] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.800660] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions [ 0.800660] ACPI: Interpreter enabled [ 0.800672] ACPI: (supports S0 S3 S4 S5) [ 0.800673] ACPI: Using IOAPIC for interrupt routing [ 0.800847] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.801108] ACPI: Enabled 5 GPEs in block 00 to 1F [ 0.802195] ACPI: Power Resource [P0S0] (on) [ 0.802214] ACPI: Power Resource [P3S0] (on) [ 0.802276] ACPI: Power Resource [P0S1] (on) [ 0.802294] ACPI: Power Resource [P3S1] (on) [ 0.804013] ACPI: Power Resource [PG00] (on) [ 0.806626] ACPI: Power Resource [PRWL] (on) [ 0.809069] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.809073] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.809201] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR] [ 0.809325] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.809325] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.809334] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge [ 0.809561] PCI host bridge to bus 0000:00 [ 0.809563] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.809563] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.809564] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.809564] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.809565] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.809565] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.809566] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfebfffff window] [ 0.809567] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window] [ 0.809567] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.809573] pci 0000:00:00.0: [1022:1630] type 00 class 0x060000 [ 0.809650] pci 0000:00:00.2: [1022:1631] type 00 class 0x080600 [ 0.809729] pci 0000:00:01.0: [1022:1632] type 00 class 0x060000 [ 0.809782] pci 0000:00:01.1: [1022:1633] type 01 class 0x060400 [ 0.809849] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.809930] pci 0000:00:01.2: [1022:1634] type 01 class 0x060400 [ 0.809955] pci 0000:00:01.2: enabling Extended Tags [ 0.809988] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold [ 0.810062] pci 0000:00:02.0: [1022:1632] type 00 class 0x060000 [ 0.810115] pci 0000:00:02.1: [1022:1634] type 01 class 0x060400 [ 0.810139] pci 0000:00:02.1: enabling Extended Tags [ 0.810172] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold [ 0.810247] pci 0000:00:02.2: [1022:1634] type 01 class 0x060400 [ 0.810303] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.810377] pci 0000:00:02.4: [1022:1634] type 01 class 0x060400 [ 0.810401] pci 0000:00:02.4: enabling Extended Tags [ 0.810434] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold [ 0.810507] pci 0000:00:08.0: [1022:1632] type 00 class 0x060000 [ 0.810559] pci 0000:00:08.1: [1022:1635] type 01 class 0x060400 [ 0.810581] pci 0000:00:08.1: enabling Extended Tags [ 0.810605] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold [ 0.810666] pci 0000:00:08.2: [1022:1635] type 01 class 0x060400 [ 0.810688] pci 0000:00:08.2: enabling Extended Tags [ 0.810712] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold [ 0.810791] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ 0.810905] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ 0.811017] pci 0000:00:18.0: [1022:1448] type 00 class 0x060000 [ 0.811051] pci 0000:00:18.1: [1022:1449] type 00 class 0x060000 [ 0.811088] pci 0000:00:18.2: [1022:144a] type 00 class 0x060000 [ 0.811122] pci 0000:00:18.3: [1022:144b] type 00 class 0x060000 [ 0.811157] pci 0000:00:18.4: [1022:144c] type 00 class 0x060000 [ 0.811190] pci 0000:00:18.5: [1022:144d] type 00 class 0x060000 [ 0.811227] pci 0000:00:18.6: [1022:144e] type 00 class 0x060000 [ 0.811263] pci 0000:00:18.7: [1022:144f] type 00 class 0x060000 [ 0.811369] pci 0000:01:00.0: [10de:2191] type 00 class 0x030000 [ 0.811392] pci 0000:01:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff] [ 0.811402] pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.811412] pci 0000:01:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref] [ 0.811419] pci 0000:01:00.0: reg 0x24: [io 0xf000-0xf07f] [ 0.811426] pci 0000:01:00.0: reg 0x30: [mem 0xfc000000-0xfc07ffff pref] [ 0.811482] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.811557] pci 0000:01:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x8 link at 0000:00:01.1 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link) [ 0.811663] pci 0000:01:00.1: [10de:1aeb] type 00 class 0x040300 [ 0.811677] pci 0000:01:00.1: reg 0x10: [mem 0xfc080000-0xfc083fff] [ 0.811797] pci 0000:01:00.2: [10de:1aec] type 00 class 0x0c0330 [ 0.811816] pci 0000:01:00.2: reg 0x10: [mem 0xc2000000-0xc203ffff 64bit pref] [ 0.811832] pci 0000:01:00.2: reg 0x1c: [mem 0xc2040000-0xc204ffff 64bit pref] [ 0.811884] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold [ 0.811938] pci 0000:01:00.3: [10de:1aed] type 00 class 0x0c8000 [ 0.811952] pci 0000:01:00.3: reg 0x10: [mem 0xfc084000-0xfc084fff] [ 0.812018] pci 0000:01:00.3: PME# supported from D0 D3hot D3cold [ 0.812106] pci 0000:00:01.1: PCI bridge to [bus 01] [ 0.812109] pci 0000:00:01.1: bridge window [io 0xf000-0xffff] [ 0.812111] pci 0000:00:01.1: bridge window [mem 0xfb000000-0xfc0fffff] [ 0.812113] pci 0000:00:01.1: bridge window [mem 0xb0000000-0xc20fffff 64bit pref] [ 0.812162] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.812184] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.812200] pci 0000:02:00.0: reg 0x18: [mem 0xfca04000-0xfca04fff 64bit] [ 0.812211] pci 0000:02:00.0: reg 0x20: [mem 0xfca00000-0xfca03fff 64bit] [ 0.812289] pci 0000:02:00.0: supports D1 D2 [ 0.812290] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.812414] pci 0000:00:01.2: PCI bridge to [bus 02] [ 0.812416] pci 0000:00:01.2: bridge window [io 0xe000-0xefff] [ 0.812418] pci 0000:00:01.2: bridge window [mem 0xfca00000-0xfcafffff] [ 0.812659] pci 0000:03:00.0: [10ec:c822] type 00 class 0x028000 [ 0.812687] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.812709] pci 0000:03:00.0: reg 0x18: [mem 0xfc900000-0xfc90ffff 64bit] [ 0.812816] pci 0000:03:00.0: supports D1 D2 [ 0.812817] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.813146] pci 0000:00:02.1: PCI bridge to [bus 03] [ 0.813148] pci 0000:00:02.1: bridge window [io 0xd000-0xdfff] [ 0.813149] pci 0000:00:02.1: bridge window [mem 0xfc900000-0xfc9fffff] [ 0.816322] pci 0000:04:00.0: [17a0:9750] type 00 class 0x080501 [ 0.816359] pci 0000:04:00.0: reg 0x10: [mem 0xfc800000-0xfc800fff] [ 0.816769] pci 0000:04:00.0: supports D1 D2 [ 0.816770] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.820071] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.820074] pci 0000:00:02.2: bridge window [mem 0xfc800000-0xfc8fffff] [ 0.820336] pci 0000:05:00.0: [144d:a808] type 00 class 0x010802 [ 0.820358] pci 0000:05:00.0: reg 0x10: [mem 0xfc700000-0xfc703fff 64bit] [ 0.820532] pci 0000:00:02.4: PCI bridge to [bus 05] [ 0.820535] pci 0000:00:02.4: bridge window [mem 0xfc700000-0xfc7fffff] [ 0.820587] pci 0000:06:00.0: [1002:1636] type 00 class 0x030000 [ 0.820602] pci 0000:06:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.820608] pci 0000:06:00.0: reg 0x18: [mem 0xe0000000-0xe01fffff 64bit pref] [ 0.820612] pci 0000:06:00.0: reg 0x20: [io 0xc000-0xc0ff] [ 0.820616] pci 0000:06:00.0: reg 0x24: [mem 0xfc500000-0xfc57ffff] [ 0.820623] pci 0000:06:00.0: enabling Extended Tags [ 0.820629] pci 0000:06:00.0: BAR 0: assigned to efifb [ 0.820666] pci 0000:06:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.820730] pci 0000:06:00.2: [1022:15df] type 00 class 0x108000 [ 0.820744] pci 0000:06:00.2: reg 0x18: [mem 0xfc400000-0xfc4fffff] [ 0.820752] pci 0000:06:00.2: reg 0x24: [mem 0xfc5c8000-0xfc5c9fff] [ 0.820758] pci 0000:06:00.2: enabling Extended Tags [ 0.820829] pci 0000:06:00.3: [1022:1639] type 00 class 0x0c0330 [ 0.820841] pci 0000:06:00.3: reg 0x10: [mem 0xfc300000-0xfc3fffff 64bit] [ 0.820861] pci 0000:06:00.3: enabling Extended Tags [ 0.820888] pci 0000:06:00.3: PME# supported from D0 D3hot D3cold [ 0.820930] pci 0000:06:00.4: [1022:1639] type 00 class 0x0c0330 [ 0.820942] pci 0000:06:00.4: reg 0x10: [mem 0xfc200000-0xfc2fffff 64bit] [ 0.820962] pci 0000:06:00.4: enabling Extended Tags [ 0.820989] pci 0000:06:00.4: PME# supported from D0 D3hot D3cold [ 0.821038] pci 0000:06:00.5: [1022:15e2] type 00 class 0x048000 [ 0.821047] pci 0000:06:00.5: reg 0x10: [mem 0xfc580000-0xfc5bffff] [ 0.821065] pci 0000:06:00.5: enabling Extended Tags [ 0.821089] pci 0000:06:00.5: PME# supported from D0 D3hot D3cold [ 0.821130] pci 0000:06:00.6: [1022:15e3] type 00 class 0x040300 [ 0.821139] pci 0000:06:00.6: reg 0x10: [mem 0xfc5c0000-0xfc5c7fff] [ 0.821157] pci 0000:06:00.6: enabling Extended Tags [ 0.821182] pci 0000:06:00.6: PME# supported from D0 D3hot D3cold [ 0.821241] pci 0000:00:08.1: PCI bridge to [bus 06] [ 0.821243] pci 0000:00:08.1: bridge window [io 0xc000-0xcfff] [ 0.821244] pci 0000:00:08.1: bridge window [mem 0xfc200000-0xfc5fffff] [ 0.821246] pci 0000:00:08.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref] [ 0.821276] pci 0000:07:00.0: [1022:7901] type 00 class 0x010601 [ 0.821305] pci 0000:07:00.0: reg 0x24: [mem 0xfc601000-0xfc6017ff] [ 0.821312] pci 0000:07:00.0: enabling Extended Tags [ 0.821393] pci 0000:07:00.1: [1022:7901] type 00 class 0x010601 [ 0.821421] pci 0000:07:00.1: reg 0x24: [mem 0xfc600000-0xfc6007ff] [ 0.821427] pci 0000:07:00.1: enabling Extended Tags [ 0.821499] pci 0000:00:08.2: PCI bridge to [bus 07] [ 0.821501] pci 0000:00:08.2: bridge window [mem 0xfc600000-0xfc6fffff] [ 0.821875] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0 [ 0.821916] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0 [ 0.821950] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0 [ 0.821993] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0 [ 0.822031] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0 [ 0.822063] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0 [ 0.822095] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0 [ 0.822126] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0 [ 0.824647] ACPI: EC: interrupt unblocked [ 0.824647] ACPI: EC: event unblocked [ 0.824647] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.824647] ACPI: EC: GPE=0x3 [ 0.824647] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC initialization complete [ 0.824647] ACPI: \_SB_.PCI0.SBRG.EC0_: EC: Used to handle transactions and events [ 0.824663] iommu: Default domain type: Translated [ 0.824768] SCSI subsystem initialized [ 0.824795] libata version 3.00 loaded. [ 0.824805] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 0.824805] pci 0000:06:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 0.824805] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.824805] pci 0000:06:00.0: vgaarb: bridge control possible [ 0.824805] pci 0000:06:00.0: vgaarb: setting as boot device [ 0.824805] vgaarb: loaded [ 0.824805] ACPI: bus type USB registered [ 0.824805] usbcore: registered new interface driver usbfs [ 0.824805] usbcore: registered new interface driver hub [ 0.824805] usbcore: registered new device driver usb [ 0.825600] pps_core: LinuxPPS API ver. 1 registered [ 0.825600] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.825600] PTP clock support registered [ 0.825600] EDAC MC: Ver: 3.0.0 [ 0.828907] Registered efivars operations [ 0.828907] NetLabel: Initializing [ 0.828907] NetLabel: domain hash size = 128 [ 0.828907] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.828907] NetLabel: unlabeled traffic allowed by default [ 0.828907] PCI: Using ACPI for IRQ routing [ 0.832221] PCI: pci_cache_line_size set to 64 bytes [ 0.836355] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.836356] e820: reserve RAM buffer [mem 0x09ef0000-0x0bffffff] [ 0.836356] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff] [ 0.836357] e820: reserve RAM buffer [mem 0xa358e018-0xa3ffffff] [ 0.836357] e820: reserve RAM buffer [mem 0xa3fcc000-0xa3ffffff] [ 0.836357] e820: reserve RAM buffer [mem 0xa3fef018-0xa3ffffff] [ 0.836358] e820: reserve RAM buffer [mem 0xa5f13000-0xa7ffffff] [ 0.836358] e820: reserve RAM buffer [mem 0xa6f9f000-0xa7ffffff] [ 0.836359] e820: reserve RAM buffer [mem 0xae000000-0xafffffff] [ 0.836359] e820: reserve RAM buffer [mem 0x42f340000-0x42fffffff] [ 0.836689] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.836691] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.842036] clocksource: Switched to clocksource hpet [ 0.849077] VFS: Disk quotas dquot_6.6.0 [ 0.849090] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.849165] AppArmor: AppArmor Filesystem Enabled [ 0.849195] pnp: PnP ACPI init [ 0.849328] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.849331] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.849394] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.849415] pnp 00:02: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active) [ 0.849574] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.849574] system 00:03: [io 0x040b] has been reserved [ 0.849575] system 00:03: [io 0x04d6] has been reserved [ 0.849576] system 00:03: [io 0x0c00-0x0c01] has been reserved [ 0.849576] system 00:03: [io 0x0c14] has been reserved [ 0.849577] system 00:03: [io 0x0c50-0x0c51] has been reserved [ 0.849578] system 00:03: [io 0x0c52] has been reserved [ 0.849578] system 00:03: [io 0x0c6c] has been reserved [ 0.849579] system 00:03: [io 0x0c6f] has been reserved [ 0.849579] system 00:03: [io 0x0cd0-0x0cd1] has been reserved [ 0.849580] system 00:03: [io 0x0cd2-0x0cd3] has been reserved [ 0.849581] system 00:03: [io 0x0cd4-0x0cd5] has been reserved [ 0.849581] system 00:03: [io 0x0cd6-0x0cd7] has been reserved [ 0.849582] system 00:03: [io 0x0cd8-0x0cdf] has been reserved [ 0.849582] system 00:03: [io 0x0800-0x089f] has been reserved [ 0.849583] system 00:03: [io 0x0b00-0x0b0f] has been reserved [ 0.849584] system 00:03: [io 0x0b20-0x0b3f] has been reserved [ 0.849584] system 00:03: [io 0x0900-0x090f] has been reserved [ 0.849585] system 00:03: [io 0x0910-0x091f] has been reserved [ 0.849586] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.849587] system 00:03: [mem 0xfec01000-0xfec01fff] could not be reserved [ 0.849587] system 00:03: [mem 0xfedc0000-0xfedc0fff] has been reserved [ 0.849588] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.849589] system 00:03: [mem 0xfed80000-0xfed8ffff] could not be reserved [ 0.849589] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.849590] system 00:03: [mem 0xff000000-0xffffffff] has been reserved [ 0.849592] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.850241] pnp: PnP ACPI: found 4 devices [ 0.857898] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.858021] NET: Registered protocol family 2 [ 0.858319] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.858435] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.858808] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.858951] TCP: Hash tables configured (established 131072 bind 65536) [ 0.859168] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.859240] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.859360] NET: Registered protocol family 1 [ 0.859366] NET: Registered protocol family 44 [ 0.859393] pci 0000:00:01.1: PCI bridge to [bus 01] [ 0.859397] pci 0000:00:01.1: bridge window [io 0xf000-0xffff] [ 0.859402] pci 0000:00:01.1: bridge window [mem 0xfb000000-0xfc0fffff] [ 0.859405] pci 0000:00:01.1: bridge window [mem 0xb0000000-0xc20fffff 64bit pref] [ 0.859410] pci 0000:00:01.2: PCI bridge to [bus 02] [ 0.859413] pci 0000:00:01.2: bridge window [io 0xe000-0xefff] [ 0.859416] pci 0000:00:01.2: bridge window [mem 0xfca00000-0xfcafffff] [ 0.859422] pci 0000:00:02.1: PCI bridge to [bus 03] [ 0.859425] pci 0000:00:02.1: bridge window [io 0xd000-0xdfff] [ 0.859428] pci 0000:00:02.1: bridge window [mem 0xfc900000-0xfc9fffff] [ 0.859434] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.859438] pci 0000:00:02.2: bridge window [mem 0xfc800000-0xfc8fffff] [ 0.859443] pci 0000:00:02.4: PCI bridge to [bus 05] [ 0.859447] pci 0000:00:02.4: bridge window [mem 0xfc700000-0xfc7fffff] [ 0.859454] pci 0000:00:08.1: PCI bridge to [bus 06] [ 0.859456] pci 0000:00:08.1: bridge window [io 0xc000-0xcfff] [ 0.859459] pci 0000:00:08.1: bridge window [mem 0xfc200000-0xfc5fffff] [ 0.859462] pci 0000:00:08.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref] [ 0.859467] pci 0000:00:08.2: PCI bridge to [bus 07] [ 0.859470] pci 0000:00:08.2: bridge window [mem 0xfc600000-0xfc6fffff] [ 0.859478] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.859480] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.859482] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.859483] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.859485] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.859487] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.859489] pci_bus 0000:00: resource 10 [mem 0xb0000000-0xfebfffff window] [ 0.859491] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window] [ 0.859493] pci_bus 0000:01: resource 0 [io 0xf000-0xffff] [ 0.859494] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfc0fffff] [ 0.859496] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xc20fffff 64bit pref] [ 0.859498] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.859500] pci_bus 0000:02: resource 1 [mem 0xfca00000-0xfcafffff] [ 0.859502] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.859503] pci_bus 0000:03: resource 1 [mem 0xfc900000-0xfc9fffff] [ 0.859505] pci_bus 0000:04: resource 1 [mem 0xfc800000-0xfc8fffff] [ 0.859507] pci_bus 0000:05: resource 1 [mem 0xfc700000-0xfc7fffff] [ 0.859508] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 0.859510] pci_bus 0000:06: resource 1 [mem 0xfc200000-0xfc5fffff] [ 0.859512] pci_bus 0000:06: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref] [ 0.859514] pci_bus 0000:07: resource 1 [mem 0xfc600000-0xfc6fffff] [ 0.859726] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.859793] pci 0000:01:00.2: D0 power state depends on 0000:01:00.0 [ 0.860069] pci 0000:01:00.3: D0 power state depends on 0000:01:00.0 [ 0.863966] PCI: CLS 64 bytes, default 64 [ 0.864020] Trying to unpack rootfs image as initramfs... [ 0.946786] Freeing initrd memory: 50360K [ 0.946811] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported [ 0.946905] pci 0000:00:00.2: can't derive routing for PCI INT A [ 0.946906] pci 0000:00:00.2: PCI INT A: not connected [ 0.946938] pci 0000:00:01.0: Adding to iommu group 0 [ 0.946946] pci 0000:00:01.1: Adding to iommu group 1 [ 0.946954] pci 0000:00:01.2: Adding to iommu group 2 [ 0.946968] pci 0000:00:02.0: Adding to iommu group 3 [ 0.946976] pci 0000:00:02.1: Adding to iommu group 4 [ 0.946987] pci 0000:00:02.2: Adding to iommu group 5 [ 0.946995] pci 0000:00:02.4: Adding to iommu group 6 [ 0.947010] pci 0000:00:08.0: Adding to iommu group 7 [ 0.947019] pci 0000:00:08.1: Adding to iommu group 7 [ 0.947026] pci 0000:00:08.2: Adding to iommu group 7 [ 0.947036] pci 0000:00:14.0: Adding to iommu group 8 [ 0.947042] pci 0000:00:14.3: Adding to iommu group 8 [ 0.947065] pci 0000:00:18.0: Adding to iommu group 9 [ 0.947071] pci 0000:00:18.1: Adding to iommu group 9 [ 0.947078] pci 0000:00:18.2: Adding to iommu group 9 [ 0.947083] pci 0000:00:18.3: Adding to iommu group 9 [ 0.947089] pci 0000:00:18.4: Adding to iommu group 9 [ 0.947097] pci 0000:00:18.5: Adding to iommu group 9 [ 0.947103] pci 0000:00:18.6: Adding to iommu group 9 [ 0.947108] pci 0000:00:18.7: Adding to iommu group 9 [ 0.947134] pci 0000:01:00.0: Adding to iommu group 10 [ 0.947152] pci 0000:01:00.1: Adding to iommu group 10 [ 0.947168] pci 0000:01:00.2: Adding to iommu group 10 [ 0.947183] pci 0000:01:00.3: Adding to iommu group 10 [ 0.947191] pci 0000:02:00.0: Adding to iommu group 11 [ 0.947199] pci 0000:03:00.0: Adding to iommu group 12 [ 0.947207] pci 0000:04:00.0: Adding to iommu group 13 [ 0.947215] pci 0000:05:00.0: Adding to iommu group 14 [ 0.947224] pci 0000:06:00.0: Adding to iommu group 7 [ 0.947229] pci 0000:06:00.2: Adding to iommu group 7 [ 0.947233] pci 0000:06:00.3: Adding to iommu group 7 [ 0.947238] pci 0000:06:00.4: Adding to iommu group 7 [ 0.947243] pci 0000:06:00.5: Adding to iommu group 7 [ 0.947247] pci 0000:06:00.6: Adding to iommu group 7 [ 0.947252] pci 0000:07:00.0: Adding to iommu group 7 [ 0.947256] pci 0000:07:00.1: Adding to iommu group 7 [ 0.948693] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40 [ 0.948694] pci 0000:00:00.2: AMD-Vi: Extended features (0x206d73ef22254ade): [ 0.948695] PPR X2APIC NX GT IA GA PC GA_vAPIC [ 0.948696] AMD-Vi: Interrupt remapping enabled [ 0.948696] AMD-Vi: Virtual APIC enabled [ 0.948697] AMD-Vi: X2APIC enabled [ 0.948874] AMD-Vi: Lazy IO/TLB flushing enabled [ 0.949494] amd_uncore: AMD NB counters detected [ 0.949497] amd_uncore: AMD LLC counters detected [ 0.950469] LVT offset 0 assigned for vector 0x400 [ 0.950947] perf: AMD IBS detected (0x000003ff) [ 0.950959] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank). [ 0.950994] check: Scanning for low memory corruption every 60 seconds [ 0.951420] Initialise system trusted keyrings [ 0.951437] Key type blacklist registered [ 0.951501] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.952225] zbud: loaded [ 0.952397] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.952567] fuse: init (API version 7.31) [ 0.953051] integrity: Platform Keyring initialized [ 0.955450] Key type asymmetric registered [ 0.955451] Asymmetric key parser 'x509' registered [ 0.955458] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.955511] io scheduler mq-deadline registered [ 0.959607] pcieport 0000:00:01.1: PME: Signaling with IRQ 26 [ 0.959768] pcieport 0000:00:01.2: PME: Signaling with IRQ 27 [ 0.959911] pcieport 0000:00:02.1: PME: Signaling with IRQ 28 [ 0.960050] pcieport 0000:00:02.2: PME: Signaling with IRQ 29 [ 0.960191] pcieport 0000:00:02.4: PME: Signaling with IRQ 30 [ 0.960340] pcieport 0000:00:08.1: PME: Signaling with IRQ 31 [ 0.960660] pcieport 0000:00:08.2: PME: Signaling with IRQ 32 [ 0.960810] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.960906] efifb: probing for efifb [ 0.965242] efifb: showing boot graphics [ 0.966416] efifb: framebuffer at 0xd0000000, using 8100k, total 8100k [ 0.966417] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.966417] efifb: scrolling: redraw [ 0.966418] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.966471] fbcon: Deferring console take-over [ 0.966472] fb0: EFI VGA frame buffer device [ 1.026146] ACPI: AC Adapter [ACAD] (on-line) [ 1.026236] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.026271] ACPI: Power Button [PWRB] [ 1.026326] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.026346] ACPI: Lid Switch [LID] [ 1.026390] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.026444] ACPI: Power Button [PWRF] [ 1.026548] Monitor-Mwait will be used to enter C-1 state [ 1.026575] ACPI: \_SB_.PLTF.P000: Found 3 idle states [ 1.026956] ACPI: \_SB_.PLTF.P001: Found 3 idle states [ 1.027077] ACPI: \_SB_.PLTF.P002: Found 3 idle states [ 1.027330] ACPI: \_SB_.PLTF.P003: Found 3 idle states [ 1.027507] ACPI: \_SB_.PLTF.P004: Found 3 idle states [ 1.028003] ACPI: \_SB_.PLTF.P005: Found 3 idle states [ 1.028244] ACPI: \_SB_.PLTF.P006: Found 3 idle states [ 1.028448] ACPI: \_SB_.PLTF.P007: Found 3 idle states [ 1.028936] ACPI: \_SB_.PLTF.P008: Found 3 idle states [ 1.029381] ACPI: \_SB_.PLTF.P009: Found 3 idle states [ 1.029585] ACPI: \_SB_.PLTF.P00A: Found 3 idle states [ 1.030061] ACPI: \_SB_.PLTF.P00B: Found 3 idle states [ 1.030341] ACPI: \_SB_.PLTF.P00C: Found 3 idle states [ 1.030924] ACPI: \_SB_.PLTF.P00D: Found 3 idle states [ 1.031206] ACPI: \_SB_.PLTF.P00E: Found 3 idle states [ 1.031718] ACPI: \_SB_.PLTF.P00F: Found 3 idle states [ 1.035747] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_PR_.P000 (20200528/dspkginit-438) [ 1.035752] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_PR_.P001 (20200528/dspkginit-438) [ 1.035753] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_PR_.P002 (20200528/dspkginit-438) [ 1.035755] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_PR_.P003 (20200528/dspkginit-438) [ 1.035756] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_PR_.P004 (20200528/dspkginit-438) [ 1.035757] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_PR_.P005 (20200528/dspkginit-438) [ 1.035759] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_PR_.P006 (20200528/dspkginit-438) [ 1.035760] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_PR_.P007 (20200528/dspkginit-438) [ 1.035761] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_PR_.P008 (20200528/dspkginit-438) [ 1.035762] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_PR_.P009 (20200528/dspkginit-438) [ 1.035764] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_PR_.P00A (20200528/dspkginit-438) [ 1.035765] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_PR_.P00B (20200528/dspkginit-438) [ 1.035766] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_PR_.P00C (20200528/dspkginit-438) [ 1.035767] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_PR_.P00D (20200528/dspkginit-438) [ 1.035769] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_PR_.P00E (20200528/dspkginit-438) [ 1.035770] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_PR_.P00F (20200528/dspkginit-438) [ 1.035775] ACPI: Invalid passive threshold [ 1.037852] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.037854] ACPI: Thermal Zone [THRM] (55 C) [ 1.038218] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.040174] Linux agpgart interface v0.103 [ 1.047364] loop: module loaded [ 1.047564] libphy: Fixed MDIO Bus: probed [ 1.047564] tun: Universal TUN/TAP device driver, 1.6 [ 1.047583] PPP generic driver version 2.4.2 [ 1.047624] VFIO - User Level meta-driver version: 0.3 [ 1.047764] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.047766] ehci-pci: EHCI PCI platform driver [ 1.047780] ehci-platform: EHCI generic platform driver [ 1.047788] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.047789] ohci-pci: OHCI PCI platform driver [ 1.047793] ohci-platform: OHCI generic platform driver [ 1.047796] uhci_hcd: USB Universal Host Controller Interface driver [ 1.047835] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.047836] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.050657] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.050778] mousedev: PS/2 mouse device common for all mice [ 1.050904] rtc_cmos 00:01: RTC can wake from S4 [ 1.051086] rtc_cmos 00:01: registered as rtc0 [ 1.051218] rtc_cmos 00:01: setting system clock to 2020-12-23T17:46:07 UTC (1608745567) [ 1.051257] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.051268] i2c /dev entries driver [ 1.051382] device-mapper: uevent: version 1.0.3 [ 1.051439] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com [ 1.051469] platform eisa.0: Probing EISA bus 0 [ 1.051472] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 1.051473] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 1.051473] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 1.051474] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 1.051475] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 1.051475] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 1.051476] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 1.051476] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 1.051477] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 1.051477] platform eisa.0: EISA: Detected 0 cards [ 1.052123] ledtrig-cpu: registered to indicate activity on CPUs [ 1.052132] EFI Variables Facility v0.08 2004-May-17 [ 1.055037] drop_monitor: Initializing network drop monitor service [ 1.055204] NET: Registered protocol family 10 [ 1.059558] Segment Routing with IPv6 [ 1.059589] NET: Registered protocol family 17 [ 1.059669] Key type dns_resolver registered [ 1.061393] microcode: CPU0: patch_level=0x08600103 [ 1.061463] microcode: CPU1: patch_level=0x08600103 [ 1.061470] microcode: CPU2: patch_level=0x08600103 [ 1.061481] microcode: CPU3: patch_level=0x08600103 [ 1.061488] microcode: CPU4: patch_level=0x08600103 [ 1.061499] microcode: CPU5: patch_level=0x08600103 [ 1.061514] microcode: CPU6: patch_level=0x08600103 [ 1.061526] microcode: CPU7: patch_level=0x08600103 [ 1.061546] microcode: CPU8: patch_level=0x08600103 [ 1.061563] microcode: CPU9: patch_level=0x08600103 [ 1.061592] microcode: CPU10: patch_level=0x08600103 [ 1.061611] microcode: CPU11: patch_level=0x08600103 [ 1.061614] microcode: CPU12: patch_level=0x08600103 [ 1.061625] microcode: CPU13: patch_level=0x08600103 [ 1.061657] microcode: CPU14: patch_level=0x08600103 [ 1.061675] microcode: CPU15: patch_level=0x08600103 [ 1.061797] microcode: Microcode Update Driver: v2.2. [ 1.062230] resctrl: L3 allocation detected [ 1.062231] resctrl: L3DATA allocation detected [ 1.062231] resctrl: L3CODE allocation detected [ 1.062231] resctrl: MB allocation detected [ 1.062232] resctrl: L3 monitoring detected [ 1.062235] IPI shorthand broadcast: enabled [ 1.062316] registered taskstats version 1 [ 1.062324] Loading compiled-in X.509 certificates [ 1.062831] Loaded X.509 cert 'Build time autogenerated kernel key: 7c721aebe6f525711943b76e93986d811d0990e3' [ 1.062876] zswap: loaded using pool lzo/zbud [ 1.063185] Key type ._fscrypt registered [ 1.063186] Key type .fscrypt registered [ 1.063186] Key type fscrypt-provisioning registered [ 1.065051] Key type encrypted registered [ 1.065058] AppArmor: AppArmor sha1 policy hashing enabled [ 1.065160] integrity: Loading X.509 certificate: UEFI:MokListRT [ 1.065207] integrity: Loaded X.509 cert 'SomeOrg: shim: a01ee84e9b37ace407961cc468c5909447878469' [ 1.065207] integrity: Loading X.509 certificate: UEFI:MokListRT [ 1.065576] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' [ 1.065783] ima: No TPM chip found, activating TPM-bypass! [ 1.065793] ima: Allocated hash algorithm: sha1 [ 1.065799] ima: No architecture policies found [ 1.065813] evm: Initialising EVM extended attributes: [ 1.065813] evm: security.selinux [ 1.065814] evm: security.SMACK64 [ 1.065814] evm: security.SMACK64EXEC [ 1.065815] evm: security.SMACK64TRANSMUTE [ 1.065815] evm: security.SMACK64MMAP [ 1.065816] evm: security.apparmor [ 1.065816] evm: security.ima [ 1.065817] evm: security.capability [ 1.065817] evm: HMAC attrs: 0x1 [ 1.066468] PM: Magic number: 0:805:795 [ 1.067066] acpi_cpufreq: overriding BIOS provided _PSD data [ 1.067683] RAS: Correctable Errors collector initialized. [ 1.067694] Unstable clock detected, switching default tracing clock to "global" If you want to keep using the local clock, then add: "trace_clock=local" on the kernel command line [ 1.140735] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.143038] battery: ACPI: Battery Slot [BAT0] (battery present) [ 1.144842] Freeing unused decrypted memory: 2040K [ 1.145500] Freeing unused kernel image (initmem) memory: 2636K [ 1.145502] Write protecting the kernel read-only data: 22528k [ 1.146018] Freeing unused kernel image (text/rodata gap) memory: 2044K [ 1.146272] Freeing unused kernel image (rodata/data gap) memory: 788K [ 1.170067] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.170101] Run /init as init process [ 1.170102] with arguments: [ 1.170103] /init [ 1.170103] splash [ 1.170103] with environment: [ 1.170104] HOME=/ [ 1.170104] TERM=linux [ 1.170105] BOOT_IMAGE=/boot/vmlinuz-5.8.0-33-generic [ 1.393167] hid: raw HID events driver (C) Jiri Kosina [ 1.398418] i2c_hid i2c-SYNA32A5:00: supply vdd not found, using dummy regulator [ 1.398429] i2c_hid i2c-SYNA32A5:00: supply vddl not found, using dummy regulator [ 1.398688] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 1.399170] acpi device:04: registered as cooling_device16 [ 1.399220] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input4 [ 1.402241] nvidia-gpu 0000:01:00.3: enabling device (0000 -> 0002) [ 1.404127] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.404133] r8169 0000:02:00.0: enabling device (0000 -> 0003) [ 1.404421] xhci_hcd 0000:01:00.2: xHCI Host Controller [ 1.404425] xhci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 1 [ 1.405024] xhci_hcd 0000:01:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010 [ 1.405122] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 1.405123] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 1.405186] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 1.405187] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.405188] usb usb1: Product: xHCI Host Controller [ 1.405189] usb usb1: Manufacturer: Linux 5.8.0-33-generic xhci-hcd [ 1.405190] usb usb1: SerialNumber: 0000:01:00.2 [ 1.405253] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 1.405294] hub 1-0:1.0: USB hub found [ 1.405301] hub 1-0:1.0: 2 ports detected [ 1.405559] xhci_hcd 0000:01:00.2: xHCI Host Controller [ 1.405562] xhci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 2 [ 1.405564] xhci_hcd 0000:01:00.2: Host supports USB 3.1 Enhanced SuperSpeed [ 1.405584] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.405603] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08 [ 1.405603] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.405604] usb usb2: Product: xHCI Host Controller [ 1.405605] usb usb2: Manufacturer: Linux 5.8.0-33-generic xhci-hcd [ 1.405606] usb usb2: SerialNumber: 0000:01:00.2 [ 1.405677] sdhci: Secure Digital Host Controller Interface driver [ 1.405678] sdhci: Copyright(c) Pierre Ossman [ 1.405681] hub 2-0:1.0: USB hub found [ 1.405690] hub 2-0:1.0: 4 ports detected [ 1.406134] xhci_hcd 0000:06:00.3: xHCI Host Controller [ 1.406139] xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 3 [ 1.406227] xhci_hcd 0000:06:00.3: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000000000000410 [ 1.406247] ahci 0000:07:00.0: version 3.0 [ 1.406375] ahci 0000:07:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 1.406377] ahci 0000:07:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 1.406382] nvme nvme0: pci function 0000:05:00.0 [ 1.406998] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 1.406999] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.407000] usb usb3: Product: xHCI Host Controller [ 1.407001] usb usb3: Manufacturer: Linux 5.8.0-33-generic xhci-hcd [ 1.407002] usb usb3: SerialNumber: 0000:06:00.3 [ 1.407013] scsi host0: ahci [ 1.407075] ata1: SATA max UDMA/133 abar m2048@0xfc601000 port 0xfc601100 irq 49 [ 1.407089] hub 3-0:1.0: USB hub found [ 1.407102] hub 3-0:1.0: 4 ports detected [ 1.407279] ahci 0000:07:00.1: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 1.407280] ahci 0000:07:00.1: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 1.407355] xhci_hcd 0000:06:00.3: xHCI Host Controller [ 1.407358] xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 4 [ 1.407360] xhci_hcd 0000:06:00.3: Host supports USB 3.1 Enhanced SuperSpeed [ 1.407372] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.407389] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08 [ 1.407390] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.407390] usb usb4: Product: xHCI Host Controller [ 1.407391] usb usb4: Manufacturer: Linux 5.8.0-33-generic xhci-hcd [ 1.407392] usb usb4: SerialNumber: 0000:06:00.3 [ 1.407469] hub 4-0:1.0: USB hub found [ 1.407477] hub 4-0:1.0: 2 ports detected [ 1.407484] scsi host1: ahci [ 1.407616] ata2: SATA max UDMA/133 abar m2048@0xfc600000 port 0xfc600100 irq 53 [ 1.407741] xhci_hcd 0000:06:00.4: xHCI Host Controller [ 1.407744] xhci_hcd 0000:06:00.4: new USB bus registered, assigned bus number 5 [ 1.407832] xhci_hcd 0000:06:00.4: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000000000000410 [ 1.408100] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 1.408101] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.408102] usb usb5: Product: xHCI Host Controller [ 1.408102] usb usb5: Manufacturer: Linux 5.8.0-33-generic xhci-hcd [ 1.408103] usb usb5: SerialNumber: 0000:06:00.4 [ 1.408184] hub 5-0:1.0: USB hub found [ 1.408190] hub 5-0:1.0: 4 ports detected [ 1.408399] xhci_hcd 0000:06:00.4: xHCI Host Controller [ 1.408402] xhci_hcd 0000:06:00.4: new USB bus registered, assigned bus number 6 [ 1.408404] xhci_hcd 0000:06:00.4: Host supports USB 3.1 Enhanced SuperSpeed [ 1.408415] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.408432] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08 [ 1.408433] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.408434] usb usb6: Product: xHCI Host Controller [ 1.408435] usb usb6: Manufacturer: Linux 5.8.0-33-generic xhci-hcd [ 1.408435] usb usb6: SerialNumber: 0000:06:00.4 [ 1.408497] hub 6-0:1.0: USB hub found [ 1.408501] hub 6-0:1.0: 2 ports detected [ 1.409847] sdhci-pci 0000:04:00.0: SDHCI controller found [17a0:9750] (rev 1) [ 1.422461] sdhci-pci 0000:04:00.0: enabling device (0000 -> 0002) [ 1.438568] nvme nvme0: missing or invalid SUBNQN field. [ 1.438587] nvme nvme0: Shutdown timeout set to 8 seconds [ 1.445112] libphy: r8169: probed [ 1.448457] r8169 0000:02:00.0 eth0: RTL8168h/8111h, 30:24:a9:7f:13:27, XID 541, IRQ 63 [ 1.448459] r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 1.448496] mmc0: SDHCI controller on PCI [0000:04:00.0] using ADMA [ 1.460667] nvme nvme0: 16/0/0 default/read/poll queues [ 1.464610] nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8 [ 1.478906] r8169 0000:02:00.0 eno1: renamed from eth0 [ 1.581319] input: SYNA32A5:00 06CB:CE17 Mouse as /devices/platform/AMDI0010:03/i2c-0/i2c-SYNA32A5:00/0018:06CB:CE17.0001/input/input5 [ 1.581649] input: SYNA32A5:00 06CB:CE17 Touchpad as /devices/platform/AMDI0010:03/i2c-0/i2c-SYNA32A5:00/0018:06CB:CE17.0001/input/input6 [ 1.581786] hid-generic 0018:06CB:CE17.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA32A5:00 06CB:CE17] on i2c-SYNA32A5:00 [ 1.722156] ata1: SATA link down (SStatus 0 SControl 300) [ 1.722259] ata2: SATA link down (SStatus 0 SControl 300) [ 1.744948] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.919749] usb 3-3: New USB device found, idVendor=30c9, idProduct=000e, bcdDevice= 0.02 [ 1.919753] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.919756] usb 3-3: Product: HP Wide Vision HD Camera [ 1.919757] usb 3-3: Manufacturer: DJKANA1BIE7P2Y [ 2.083243] usb 3-4: new full-speed USB device number 3 using xhci_hcd [ 2.270872] usb 3-4: New USB device found, idVendor=0bda, idProduct=b00c, bcdDevice= 0.00 [ 2.270877] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.270880] usb 3-4: Product: 802.11ac WLAN Adapter [ 2.270882] usb 3-4: Manufacturer: Realtek [ 2.270883] usb 3-4: SerialNumber: 00e04c000001 [ 2.361645] fbcon: Taking over console [ 2.361735] Console: switching to colour frame buffer device 240x67 [ 2.366968] EXT4-fs (nvme0n1p8): mounted filesystem with ordered data mode. Opts: (null) [ 2.443754] systemd[1]: Inserted module 'autofs4' [ 2.461662] systemd[1]: systemd 245.4-4ubuntu3.2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 2.480790] systemd[1]: Detected architecture x86-64. [ 2.515688] systemd[1]: Set hostname to <omen15>. [ 2.564120] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. [ 2.597981] systemd[1]: Created slice system-modprobe.slice. [ 2.598130] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 2.598237] systemd[1]: Created slice User and Session Slice. [ 2.598279] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.598390] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 2.598435] systemd[1]: Reached target User and Group Name Lookups. [ 2.598455] systemd[1]: Reached target Remote File Systems. [ 2.598469] systemd[1]: Reached target Slices. [ 2.598913] systemd[1]: Listening on Syslog Socket. [ 2.598962] systemd[1]: Listening on fsck to fsckd communication Socket. [ 2.598994] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 2.599086] systemd[1]: Listening on Journal Audit Socket. [ 2.599133] systemd[1]: Listening on Journal Socket (/dev/log). [ 2.599187] systemd[1]: Listening on Journal Socket. [ 2.599238] systemd[1]: Listening on udev Control Socket. [ 2.599278] systemd[1]: Listening on udev Kernel Socket. [ 2.599795] systemd[1]: Mounting Huge Pages File System... [ 2.600215] systemd[1]: Mounting POSIX Message Queue File System... [ 2.600868] systemd[1]: Mounting Kernel Debug File System... [ 2.601658] systemd[1]: Mounting Kernel Trace File System... [ 2.602980] systemd[1]: Starting Journal Service... [ 2.603652] systemd[1]: Starting Set the console keyboard layout... [ 2.604560] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 2.605451] systemd[1]: Starting Load Kernel Module drm... [ 2.605799] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 2.605839] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 2.606800] systemd[1]: Starting Load Kernel Modules... [ 2.607535] systemd[1]: Starting Remount Root and Kernel File Systems... [ 2.608041] systemd[1]: Starting udev Coldplug all Devices... [ 2.608600] systemd[1]: Starting Uncomplicated firewall... [ 2.609859] systemd[1]: Mounted Huge Pages File System. [ 2.610053] systemd[1]: Mounted POSIX Message Queue File System. [ 2.610143] systemd[1]: Mounted Kernel Debug File System. [ 2.610305] systemd[1]: Mounted Kernel Trace File System. [ 2.610648] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 2.611743] systemd[1]: Finished Uncomplicated firewall. [ 2.614851] EXT4-fs (nvme0n1p8): re-mounted. Opts: errors=remount-ro [ 2.615661] systemd[1]: Finished Remount Root and Kernel File Systems. [ 2.616343] systemd[1]: Activating swap /swapfile... [ 2.616596] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 2.616635] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 2.617279] lp: driver loaded but no devices found [ 2.617302] systemd[1]: Starting Load/Save Random Seed... [ 2.618098] systemd[1]: Starting Create System Users... [ 2.618812] systemd[1]: modprobe@drm.service: Succeeded. [ 2.619253] systemd[1]: Finished Load Kernel Module drm. [ 2.620023] ppdev: user-space parallel port driver [ 2.622686] systemd[1]: Finished Load Kernel Modules. [ 2.623961] systemd[1]: Mounting FUSE Control File System... [ 2.625108] systemd[1]: Mounting Kernel Configuration File System... [ 2.626053] systemd[1]: Starting Apply Kernel Variables... [ 2.627577] systemd[1]: Mounted FUSE Control File System. [ 2.627666] systemd[1]: Mounted Kernel Configuration File System. [ 2.629247] systemd[1]: Finished Load/Save Random Seed. [ 2.629587] systemd[1]: Finished Create System Users. [ 2.630532] systemd[1]: Starting Create Static Device Nodes in /dev... [ 2.636632] systemd[1]: Finished Apply Kernel Variables. [ 2.639758] systemd[1]: Finished Create Static Device Nodes in /dev. [ 2.640617] systemd[1]: Starting udev Kernel Device Manager... [ 2.650265] systemd[1]: Finished Set the console keyboard layout. [ 2.650370] systemd[1]: Reached target Local File Systems (Pre). [ 2.651569] systemd[1]: Mounting Mount unit for core18, revision 1880... [ 2.652265] systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 36... [ 2.652798] Adding 2087644k swap on /swapfile. Priority:-2 extents:6 across:2251484k SSFS [ 2.653666] systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1506... [ 2.655287] systemd[1]: Mounting Mount unit for snap-store, revision 467... [ 2.656399] systemd[1]: Mounting Mount unit for snapd, revision 8542... [ 2.656459] systemd[1]: Activated swap /swapfile. [ 2.656676] systemd[1]: Reached target Swap. [ 2.682329] systemd[1]: Started Journal Service. [ 2.688781] systemd-journald[360]: Received client request to flush runtime journal. [ 2.823835] snd_pci_acp3x 0000:06:00.5: enabling device (0000 -> 0002) [ 2.823985] snd_pci_acp3x 0000:06:00.5: Invalid ACP audio mode : 0 [ 2.825080] ccp 0000:06:00.2: enabling device (0000 -> 0002) [ 2.825322] ccp 0000:06:00.2: ccp: unable to access the device: you might be running a broken BIOS. [ 2.832306] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.832436] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.835470] ccp 0000:06:00.2: tee enabled [ 2.835474] ccp 0000:06:00.2: psp enabled [ 2.888890] mc: Linux media interface: v0.10 [ 2.889971] pstore: Using crash dump compression: deflate [ 2.889994] pstore: Registered efi as persistent store backend [ 2.893632] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer [ 2.893635] RAPL PMU: hw unit of domain package 2^-16 Joules [ 2.895067] input: HP WMI hotkeys as /devices/virtual/input/input8 [ 2.897824] Bluetooth: Core ver 2.22 [ 2.897856] NET: Registered protocol family 31 [ 2.897858] Bluetooth: HCI device and connection manager initialized [ 2.897870] Bluetooth: HCI socket layer initialized [ 2.897873] Bluetooth: L2CAP socket layer initialized [ 2.897879] Bluetooth: SCO socket layer initialized [ 2.900988] videodev: Linux video capture interface: v2.00 [ 2.902482] cryptd: max_cpu_qlen set to 1000 [ 2.904485] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> [ 2.907632] AVX2 version of gcm_enc/dec engaged. [ 2.907633] AES CTR mode by8 optimization enabled [ 2.914652] uvcvideo: Found UVC 1.00 device HP Wide Vision HD Camera (30c9:000e) [ 2.921439] usbcore: registered new interface driver btusb [ 2.926065] rtw_8822ce 0000:03:00.0: enabling device (0000 -> 0003) [ 2.926706] rtw_8822ce 0000:03:00.0: Firmware version 7.3.0, H2C version 14 [ 2.926754] rtw_8822ce 0000:03:00.0: Firmware version 7.3.0, H2C version 14 [ 2.937441] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [ 2.938046] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002) [ 2.939432] Bluetooth: hci0: RTL: rom_version status=0 version=3 [ 2.939435] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [ 2.939748] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [ 2.939852] Bluetooth: hci0: RTL: cfg_sz 6, total sz 31422 [ 2.943147] input: HP Wide Vision HD Camera: HP Wi as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb3/3-3/3-3:1.0/input/input9 [ 2.952650] [drm:amdgpu_init [amdgpu]] *ERROR* VGACON disables amdgpu kernel modesetting. [ 2.953650] rtw_8822ce 0000:03:00.0 wlo1: renamed from wlan0 [ 3.196519] nvidia: loading out-of-tree module taints kernel. [ 3.196542] nvidia: module license 'NVIDIA' taints kernel. [ 3.196543] Disabling lock debugging due to kernel taint [ 3.197025] snd_hda_intel 0000:01:00.1: Disabling MSI [ 3.197038] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 3.197297] snd_hda_intel 0000:06:00.6: enabling device (0000 -> 0002) [ 3.201823] kvm: Nested Virtualization enabled [ 3.201856] SVM: kvm: Nested Paging enabled [ 3.201857] SVM: Virtual VMLOAD VMSAVE supported [ 3.201858] SVM: Virtual GIF supported [ 3.216968] acp_pdm_mach acp_pdm_mach.0: dmic-hifi <-> acp_rn_pdm_dma.0 mapping ok [ 3.217447] Bluetooth: hci0: RTL: fw version 0x09993aa1 [ 3.217821] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 3.219466] MCE: In-kernel MCE decoding enabled. [ 3.221103] EDAC amd64: F17h_M60h detected (node 0). [ 3.221152] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.253777] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input10 [ 3.255169] nvidia-nvlink: Nvlink Core is being initialized, major device number 511 [ 3.255680] nvidia 0000:01:00.0: enabling device (0002 -> 0003) [ 3.255810] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none [ 3.301829] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 450.80.02 Wed Sep 23 01:13:39 UTC 2020 [ 3.325235] usbcore: registered new interface driver uvcvideo [ 3.325238] USB Video Class driver (1.1.1) [ 3.325547] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input11 [ 3.325694] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input12 [ 3.325877] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input13 [ 3.326012] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input14 [ 3.326150] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input15 [ 3.333075] input: SYNA32A5:00 06CB:CE17 Mouse as /devices/platform/AMDI0010:03/i2c-0/i2c-SYNA32A5:00/0018:06CB:CE17.0001/input/input16 [ 3.333250] input: SYNA32A5:00 06CB:CE17 Touchpad as /devices/platform/AMDI0010:03/i2c-0/i2c-SYNA32A5:00/0018:06CB:CE17.0001/input/input17 [ 3.333335] hid-multitouch 0018:06CB:CE17.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA32A5:00 06CB:CE17] on i2c-SYNA32A5:00 [ 3.362588] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC245: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker [ 3.362644] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.362651] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 3.362696] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 3.362700] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 3.362703] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19 [ 3.363940] EDAC amd64: F17h_M60h detected (node 0). [ 3.364034] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.367652] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 450.80.02 Wed Sep 23 00:48:09 UTC 2020 [ 3.374046] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver [ 3.374049] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0 [ 3.389698] nvidia-uvm: Loaded the UVM driver, major device number 509. [ 3.407630] audit: type=1400 audit(1608745569.852:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=723 comm="apparmor_parser" [ 3.408691] audit: type=1400 audit(1608745569.856:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=724 comm="apparmor_parser" [ 3.415559] audit: type=1400 audit(1608745569.860:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=727 comm="apparmor_parser" [ 3.428121] audit: type=1400 audit(1608745569.872:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=735 comm="apparmor_parser" [ 3.429889] audit: type=1400 audit(1608745569.876:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=722 comm="apparmor_parser" [ 3.431200] audit: type=1400 audit(1608745569.876:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=728 comm="apparmor_parser" [ 3.432115] audit: type=1400 audit(1608745569.876:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=728 comm="apparmor_parser" [ 3.441581] audit: type=1400 audit(1608745569.888:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=737 comm="apparmor_parser" [ 3.442311] audit: type=1400 audit(1608745569.888:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=737 comm="apparmor_parser" [ 3.485666] EDAC amd64: F17h_M60h detected (node 0). [ 3.485708] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.485821] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:08.1/0000:06:00.6/sound/card1/input19 [ 3.485912] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:06:00.6/sound/card1/input20 [ 3.573733] EDAC amd64: F17h_M60h detected (node 0). [ 3.573786] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.662241] EDAC amd64: F17h_M60h detected (node 0). [ 3.662290] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.741254] EDAC amd64: F17h_M60h detected (node 0). [ 3.741301] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.813617] EDAC amd64: F17h_M60h detected (node 0). [ 3.813664] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.826721] nvidia-gpu 0000:01:00.3: i2c timeout error e0000000 [ 3.826730] ucsi_ccg 1-0008: i2c_transfer failed -110 [ 3.826733] ucsi_ccg 1-0008: ucsi_ccg_init failed - -110 [ 3.826743] ucsi_ccg: probe of 1-0008 failed with error -110 [ 3.893826] EDAC amd64: F17h_M60h detected (node 0). [ 3.893879] EDAC amd64: Node 0: DRAM ECC disabled. [ 3.953798] EDAC amd64: F17h_M60h detected (node 0). [ 3.953849] EDAC amd64: Node 0: DRAM ECC disabled. [ 4.037740] EDAC amd64: F17h_M60h detected (node 0). [ 4.037787] EDAC amd64: Node 0: DRAM ECC disabled. [ 4.141382] EDAC amd64: F17h_M60h detected (node 0). [ 4.141428] EDAC amd64: Node 0: DRAM ECC disabled. [ 4.217133] EDAC amd64: F17h_M60h detected (node 0). [ 4.217174] EDAC amd64: Node 0: DRAM ECC disabled. [ 4.313333] EDAC amd64: F17h_M60h detected (node 0). [ 4.313385] EDAC amd64: Node 0: DRAM ECC disabled. [ 4.373618] EDAC amd64: F17h_M60h detected (node 0). [ 4.373657] EDAC amd64: Node 0: DRAM ECC disabled. [ 4.413719] EDAC amd64: F17h_M60h detected (node 0). [ 4.413775] EDAC amd64: Node 0: DRAM ECC disabled. [ 4.449716] EDAC amd64: F17h_M60h detected (node 0). [ 4.449763] EDAC amd64: Node 0: DRAM ECC disabled. [ 6.516796] kauditd_printk_skb: 17 callbacks suppressed [ 6.516799] audit: type=1400 audit(1608745572.964:28): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=732 comm="apparmor_parser" [ 6.518504] audit: type=1400 audit(1608745572.964:29): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=732 comm="apparmor_parser" [ 6.831208] audit: type=1400 audit(1608745573.276:30): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/8542/usr/lib/snapd/snap-confine" pid=781 comm="apparmor_parser" [ 6.831850] audit: type=1400 audit(1608745573.276:31): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/8542/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=781 comm="apparmor_parser" [ 6.853468] audit: type=1400 audit(1608745573.300:32): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.snap-store.ubuntu-software" pid=784 comm="apparmor_parser" [ 6.871955] audit: type=1400 audit(1608745573.316:33): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.snap-store.snap-store" pid=783 comm="apparmor_parser" [ 6.883570] audit: type=1400 audit(1608745573.328:34): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.snap-store.ubuntu-software-local-file" pid=785 comm="apparmor_parser" [ 7.025049] audit: type=1400 audit(1608745573.472:35): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.snap-store" pid=782 comm="apparmor_parser" [ 7.175387] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 7.175388] Bluetooth: BNEP filters: protocol multicast [ 7.175393] Bluetooth: BNEP socket layer initialized [ 7.182445] NET: Registered protocol family 38 [ 7.191659] audit: type=1400 audit(1608745573.636:36): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=876 comm="cups-browsed" capability=23 capname="sys_nice" [ 7.272711] Generic FE-GE Realtek PHY r8169-200:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE) [ 7.453029] r8169 0000:02:00.0 eno1: Link is Down [ 7.979105] ACPI Warning: \_SB.PCI0.GPP0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20200528/nsarguments-59) [ 8.554402] rtw_8822ce 0000:03:00.0: start vif 18:47:3d:1d:c4:1b on port 0 [ 10.406602] rfkill: input handler disabled [ 12.689410] wlo1: authenticate with 46:d9:e7:fb:d6:fb [ 13.223869] wlo1: send auth to 46:d9:e7:fb:d6:fb (try 1/3) [ 13.229516] wlo1: authenticated [ 13.232802] wlo1: associate with 46:d9:e7:fb:d6:fb (try 1/3) [ 13.237226] wlo1: RX AssocResp from 46:d9:e7:fb:d6:fb (capab=0x411 status=0 aid=1) [ 13.237256] rtw_8822ce 0000:03:00.0: sta 46:d9:e7:fb:d6:fb joined with macid 0 [ 13.237567] wlo1: associated [ 13.265287] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 15.462787] rfkill: input handler enabled [ 15.894246] Bluetooth: RFCOMM TTY layer initialized [ 15.894253] Bluetooth: RFCOMM socket layer initialized [ 15.894259] Bluetooth: RFCOMM ver 1.11 [ 17.365424] rfkill: input handler disabled [ 154.192552] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled [ 154.197416] JFS: nTxBlock = 8192, nTxLock = 65536 [ 154.210349] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [ 154.229328] QNX4 filesystem 0.2.3 registered. [ 154.304909] raid6: avx2x4 gen() 34794 MB/s [ 154.376685] raid6: avx2x4 xor() 9762 MB/s [ 154.445077] raid6: avx2x2 gen() 34691 MB/s [ 154.515010] raid6: avx2x2 xor() 23381 MB/s [ 154.580679] raid6: avx2x1 gen() 29710 MB/s [ 154.648903] raid6: avx2x1 xor() 18401 MB/s [ 154.717067] raid6: sse2x4 gen() 17674 MB/s [ 154.784888] raid6: sse2x4 xor() 9165 MB/s [ 154.856902] raid6: sse2x2 gen() 19655 MB/s [ 154.924898] raid6: sse2x2 xor() 12086 MB/s [ 154.993069] raid6: sse2x1 gen() 15520 MB/s [ 155.064687] raid6: sse2x1 xor() 9287 MB/s [ 155.064688] raid6: using algorithm avx2x4 gen() 34794 MB/s [ 155.064688] raid6: .... xor() 9762 MB/s, rmw enabled [ 155.064689] raid6: using avx2x2 recovery algorithm [ 155.069193] xor: automatically using best checksumming function avx [ 155.084144] Btrfs loaded, crc32c=crc32c-intel [ 171.494266] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [ 171.494269] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known. [ 223.951670] systemd[1]: systemd 245.4-4ubuntu3.3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 223.974735] systemd[1]: Detected architecture x86-64. [ 224.010382] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. [ 224.194387] systemd-journald[360]: Received SIGTERM from PID 1 (systemd). [ 224.194423] systemd[1]: Stopping Journal Service... [ 224.213883] systemd[1]: systemd-journald.service: Succeeded. [ 224.214455] systemd[1]: Stopped Journal Service. [ 224.218664] systemd[1]: Starting Journal Service... [ 224.276700] systemd[1]: Started Journal Service. [ 224.285052] systemd-journald[34721]: Received client request to flush runtime journal. [ 225.399299] audit: type=1400 audit(1608745791.843:37): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=34838 comm="apparmor_parser" [ 225.418439] audit: type=1400 audit(1608745791.863:38): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=34838 comm="apparmor_parser" [ 226.426438] audit: type=1400 audit(1608745792.869:39): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/snapd/8542/usr/lib/snapd/snap-confine" pid=34941 comm="apparmor_parser" [ 226.472807] audit: type=1400 audit(1608745792.917:40): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/snapd/8542/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=34941 comm="apparmor_parser" [ 226.472937] audit: type=1400 audit(1608745792.917:41): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.snap-store" pid=34942 comm="apparmor_parser" [ 226.473130] audit: type=1400 audit(1608745792.917:42): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.snap-store.ubuntu-software-local-file" pid=34945 comm="apparmor_parser" [ 226.473194] audit: type=1400 audit(1608745792.917:43): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.snap-store.ubuntu-software" pid=34944 comm="apparmor_parser" [ 226.473339] audit: type=1400 audit(1608745792.917:44): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.snap-store.snap-store" pid=34943 comm="apparmor_parser" [ 226.881315] audit: type=1400 audit(1608745793.329:45): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/snapd/8542/usr/lib/snapd/snap-confine" pid=34998 comm="apparmor_parser" [ 226.881321] audit: type=1400 audit(1608745793.329:46): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/snapd/8542/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=34998 comm="apparmor_parser" [ 241.797808] wlo1: deauthenticating from 46:d9:e7:fb:d6:fb by local choice (Reason: 3=DEAUTH_LEAVING) [ 241.824775] rtw_8822ce 0000:03:00.0: sta 46:d9:e7:fb:d6:fb with macid 0 left [ 241.826826] wlo1: authenticate with 46:d9:e7:fb:d6:fb [ 242.116814] wlo1: send auth to 46:d9:e7:fb:d6:fb (try 1/3) [ 242.120112] wlo1: authenticated [ 242.120687] wlo1: associate with 46:d9:e7:fb:d6:fb (try 1/3) [ 242.126695] wlo1: RX AssocResp from 46:d9:e7:fb:d6:fb (capab=0x411 status=0 aid=1) [ 242.126719] rtw_8822ce 0000:03:00.0: sta 46:d9:e7:fb:d6:fb joined with macid 0 [ 242.127014] wlo1: associated [ 1754.561793] kauditd_printk_skb: 4 callbacks suppressed [ 1754.561795] audit: type=1400 audit(1608747321.008:51): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.chromium.hook.configure" pid=52051 comm="apparmor_parser" [ 1754.568676] audit: type=1400 audit(1608747321.012:52): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.chromium.chromium" pid=52050 comm="apparmor_parser" [ 1754.568859] audit: type=1400 audit(1608747321.016:53): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.chromium.chromedriver" pid=52049 comm="apparmor_parser" [ 1754.570233] audit: type=1400 audit(1608747321.016:54): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.chromium" pid=52048 comm="apparmor_parser" [ 1756.675898] audit: type=1400 audit(1608747323.119:55): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/snapd/8542/usr/lib/snapd/snap-confine" pid=52211 comm="apparmor_parser" [ 1756.675904] audit: type=1400 audit(1608747323.119:56): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/snapd/8542/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=52211 comm="apparmor_parser" [ 1756.805484] audit: type=1400 audit(1608747323.251:57): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.chromium.hook.configure" pid=52216 comm="apparmor_parser" [ 1757.171009] audit: type=1400 audit(1608747323.615:58): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.chromium" pid=52213 comm="apparmor_parser" [ 1757.490743] audit: type=1400 audit(1608747323.935:59): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.chromium.chromedriver" pid=52214 comm="apparmor_parser" [ 1757.507608] audit: type=1400 audit(1608747323.951:60): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.chromium.chromium" pid=52215 comm="apparmor_parser" [ 4187.070739] rfkill: input handler enabled [ 4187.070859] rfkill: input handler disabled [ 4505.881350] atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0). [ 4505.881356] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
Fazit
Mit ein paar Kniffen (s.o.), funktioniert Ubuntu 20.04.1 gut auf dem HP Omen 15-EN.